Eagle Hueforge

Mood. Print Instruction:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.11x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm Filaments Used: #000000 PLA Black Transmission Distance: 0.1 #0086d6 PLA Basic Cyan Transmission Distance: 2.4 #cd382e PLA Red Transmission Distance: 4.5 #ffff00 PLA Yellow Transmission Distance: 6 #ffffff PLA White Transmission Distance: 7This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cyan At layer #10 (0.88mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest. For only ONE AMS,Start with 4 colors as follows,Slot1: BlackSlot2: CyanSlot3: RedSlot4: YellowPause was set at Layer #9 to allow color swap:Slot1: Black --> White