Eagle Hueforge

Project: Adler.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 175x98.44mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.2mm and the Actual Thickness is 1.12mm Filaments Used:#000000 PLA BambuLab Basic Black Transmission Distance: 0.6#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 2 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Ivory White for the rest. The stand used for the Hueforge can be printed here:https://makerworld.com/models/2002778?appSharePlatform=copy