Eagle Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled White Transmission Distance: 5.7 PLA Smart Recycled Blue Transmission Distance: 2.2This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to White At layer #13 (1.12mm) swap to Black At layer #15 (1.28mm) swap to Blue At layer #19 (1.6mm) swap to White for the rest.