Earth - Hueforge

This is 4 color Hueforge of planet Earth. Its part of my project to make all planets as a hueforge pictures, so i can hang them on my wall. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.7mm and the Actual Depth is 1.7mm Filaments Used:PLA Dark Blue Transmission Distance: 2PLA Blue Transmission Distance: 3PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with Dark BlueAt layer #7 (0.64mm) swap to BlueAt layer #11 (0.96mm) swap to Ice BlueAt layer #17 (1.44mm) swap to Jade White for the rest.