Easter Bunny Duck

Easter Bunny Duck! You will need an AMS unit to print it. I also uploaded a reduced colored version for faster print, and reduced poop. To speed up the multicolor print, the egg is printed on a separate plate. To set the color changes on the egg, I used the 'change color' command in the layer bar. When printing the second plate, the system will prompt you for the colors, where you can set your preferred ones. After finishing the print, you need to insert the connector into the egg, and then place it in the bunny. You don't need any superglue! Before starting a print, make sure to create enough space for the chute, or if you have a chute tray, empty it :)! After the print, you'll need some fine-tuning! After carefully removing the support, it may leave some marks. You can sand it a little if you wish :) (In the uploaded photos, I didn't sand it at all.)). If you download the STL file, you'll need to set the printer parameters yourself, and you may need to test th