Easter Bunny with top hat

Bunny painted in 2 different ways (super easy to paint), also Charcoal and Bone White versions straight from the printer. My New Metallic Sculpture collection: https://makerworld.com/en/collections/23924034-metalic-sculptures More sculptures: https://makerworld.com/en/collections/9605699-sculptures Print Instructions for Best Results 1. Clean the build plate thoroughly with dish soap until it “squeaks” under your finger. 2. Allow the model and build plate to cool completely to room temperature (about 30 minutes). 3. Do not remove the print by pulling or yanking the model. 4. Instead, remove the build plate and gently flex it—the model (with supports) should release on its own. 5. Use 3D cutters to remove supports for a cleaner and easier finish. (They’re inexpensive and well worth it.) 6. Do not remove supports immediately after printing—they are still hot and may not detach cleanly. Let them cool fully; they will come off much more easily. 7. For PETG and ABS prints, use Elmer’s glue