Easter egg box (with a key lock)

Themed Easter candy box in which you can not only hide something but also lock itThere are 2 models of boxes to choose from: An egg box and an egg box with rabbit ears and feet.Also 3 models of keys: Carrot key 3D,Carrot key 2D,Egg keyInstructions:Take the finished top of the box and insert the lock into the hole made on the inside (shown in the photo)Then connect the top and bottom of the box and insert a piece of filament into the box loop (shown in the photo) so that it goes through, then cut off the excess thread! (you may need to clean the holes depending on the cleanliness of the print)And you can use the box :) Carrot key assembly print 3 models : Carrot key 3D (Bottom),Carrot key 3D (Top),Carrot key conectorthen take any part of the key, insert the connector into it, then take the other part of the key and connectPrint settings:Printer: Creality K1Nozzle: 0.4Build Plate: PEISlicer: Creality PrintPlastic: Creality Hyper PLALayer Height: 0.20Line wight: 0.42Wall lines: 2Filling: 15%Temp nozzle: 210°Temp bed: 60°Print Speed: 300.00Infill Speed: 300.00Outer Wall Speed: 210.00Inner Wall Speed: 240.00Top Surface Skin Speed: 210.00Top/Bottom Speed: 210.00Cooling: ONIroning: Off Support: Off