Easter Egg Tambourine

A fun easter based fully printed tambourine! Comes in three designs, prints in just over 2 hours and 40 minutes and about 4 inches from tip to bottom. It is designed to look best with the Starry 3D Effect Plate, but will work well with any plate. Keep in mind the Starry only works well consistently with PLA. You can use any color with any PLA. I used the "Hilbert Curve" for the first layer pattern to give a really cool effect. Tree supports at 20° ensure supports don't get in the way.!There is some assembly during printing so be sure to read the directions below!Boost MeThanks for printing! If you liked my work please give a boost!There are several plates but be sure to print out the “components” plate first as they will be necessary during printing. Once you have printed the components and decided on the body you want to print, either Zig-Zag, Polka-dot, or Striped, you can start printing the body.There is a pause at about 1h20m, so you can put in the cymbals.Once all the