Easter Special - Egg Set 01

Cute Decorative Easter Eggs. Make sure to upload a make after printing, I'll love to see them. Happy Printing:) IMPORTANT : If you want to support my work and also want sale 3D prints from my designs, please become a Patreon here : https://www.patreon.com/akash_3dprints Thankyou!! Print Setting info: STL and 3MF files are included. If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project. *Print-in-Place, No supports needed. *Multicolor 3MF *0.2 Layer height (Use 0.12 or 0.16 layer height for better quality) *10%-15% Infill (I recommend Gyroid, Honeycomb or Grid) *3 Walls (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes) *Make sure you have good adhesion. *I tested this model on scale of 50% to 200%, I do not suggest smaller than 60% for the model. Happy Printing :)