EASY E HUEFORGE

Project: easy e.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.4x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BAMBULAB BASIC PURPLE Transmission Distance: 1.6 PLA bambulad cyan Transmission Distance: 1.7 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Dark Blue At layer #6 (0.56mm) swap to Black At layer #8 (0.72mm) swap to Grey At layer #10 (0.88mm) swap to Black At layer #17 (1.44mm) swap to Dark Brown At layer #19 (1.6mm) swap to Latte Brown At layer #20 (1.68mm) swap to PURPLE At layer #21 (1.76mm) swap t