easy foil mount nut aligner

When mounting the foil to board it can be tricky to put all the nuts in place. This part helps to align the nuts with the baseplate of the foil.
I designed the part for nuts from Gong Galaxy (the opening for the nut is 22x7mm)

print four of them.
put the nuts inside the printed parts
glue a rod of 149mm length in the side holes of the printed parts
(the first site can be glued before putting the nut in the fin box - the second should be glued in the fin box. I use hot glue for this - just put the glue in the hole, insert the nut in the box - put the rod in the hole with the soft glue. (You must be quick for this.)