Thingiverse

Ebike PAS Sensor Mount

by cbxbiker61

36 Downloads

21 Likes

0 Makes

Ebike PAS mount. Print with supports, they're easy to remove after printing.

This part works in conjunction with the PAS magnet ring. https://www.thingiverse.com/thing:1548139

The scad file is include so you can tune the settings to your bottom bracket dimensions/offsets. Ideally you will end up with a friction fit which is plenty good for this type of part.

ebike mount PAS

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required Hardware needed

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ebike PAS Sensor Mount?

Any FDM printer should handle Ebike PAS Sensor Mount just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Ebike PAS Sensor Mount need supports when printing?

Yes, Ebike PAS Sensor Mount will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Ebike PAS Sensor Mount available in?

Ebike PAS Sensor Mount is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Ebike PAS Sensor Mount free to download?

Yes, Ebike PAS Sensor Mount is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Ebike PAS Sensor Mount

Add to Collection