Learning
Ver Modelo
ECG/EKG Wallet Tool
42
Descargas
41
Likes
0
Makes
This is for educational use only and you are ultimately responsible for any 12-lead you use this on. I am providing this for training purposes only.
This is released on a NON-COMMERCIAL basis. You DO NOT have permission to profit from this design.
After printing you will need to confirm measurements as if your printer calibration/filament shrink changes the dimensions none of the measurements will be valid. To confirm this you can use the PR-I box which is 5mm x 5mm and therefore should match up with one large box on your ECG/EKG you can also verify this measurement with calipers.
For best results I recommend utilizing a transparent filament for the base then a dark filament for the text. In my example I used Clear PETG for the base and Black PETG for the lettering.
To get the lettering to work you will need to use .2 mm layer heights and do a color change at the final layer as the lettering is .2mm high.
This is released on a NON-COMMERCIAL basis. You DO NOT have permission to profit from this design.
After printing you will need to confirm measurements as if your printer calibration/filament shrink changes the dimensions none of the measurements will be valid. To confirm this you can use the PR-I box which is 5mm x 5mm and therefore should match up with one large box on your ECG/EKG you can also verify this measurement with calipers.
For best results I recommend utilizing a transparent filament for the base then a dark filament for the text. In my example I used Clear PETG for the base and Black PETG for the lettering.
To get the lettering to work you will need to use .2 mm layer heights and do a color change at the final layer as the lettering is .2mm high.
B3dlam también publica en
4 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!