Echidna Re:Zero Hueforge

Project: echidna.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 107.98x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Pine Green Transmission Distance: 1 PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Purple Transmission Distance: 2 PLA BambuLab Basic Grey Transmission Distance: 1 PLA BambuLab Matte Latte Br