Slicer Discord
Echo Dot 4th/5th Gen Wall Mount – 3D-printbaar model van MakerWorld MakerWorld
Other House Models

Echo Dot 4th/5th Gen Wall Mount

654 Downloads
89 Likes
373 Makes
Model downloaden
A wall compatible with Echo Dot 4th and 5th generation that fits with most screws that are 4mm and below in diameter with 8mm and below screw heads. The measurements are: Printed With Supports (You may want to increase the support z distance as I spent around an hour removing them), 0.2 mm layer height, and gyroid infill as it is one of the strongest. I used wall anchors, but these are optional if you screw into a stud. I also uploaded the Fusion 360 file so that you can modify it if you need to.
Categorie
Other House Models
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Gemiddelde betrouwbaarheid
Waarom?
supports nodig · 0.20mm lagen
Eendelig Supports vereist Hardware nodig
Supports 2/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Laaghoogte
0.2 mm
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

2 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie