Echo Show 5 wall fixing arm

FeaturesYou can fix the Amazon Echo Show 5, which tends to get in the way, to the wall. The bottom of the Echo Show is magnetically attached, so we've embedded a neodymium magnet to prevent it from falling. You can secure it even more strongly by using double-sided tape.Since it uses a 2-axis hinge, the orientation can be changed freely. Materials needed・Bolt and nut: M6-2.5cm・Prepare washers and spring washers if necessary.・Neodymium magnet: diameter 12.7mm, thickness 2.5mm・Instant adhesive (for fixing magnets)・4mm diameter wood screws for wall fixing NotePause during printing and drop some instant adhesive into the magnet hole to secure the magnet. (This may not be necessary if the printer head is not made of iron.)The magnetic strength of magnets varies, so be sure to check that it will not fall before installing it on the wall. If the magnetic force is insufficient, please reinforce it with adhesive or double-sided tape.If the printed shaft is tight, widen the hole with a file.