Eclipse girl - hueforge

Hueforge of eclipse girlThe photos shows the result in 149.95x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament at the specified heights. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 149.95x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.04mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with BambuLab Basic Black At layer #21 (1mm) swap to BambuLab Basic Or