MakerWorld
Hueforge & Lithophane
Ver Modelo
Eevee Evolution Glaceon Hueforge
16
Descargas
30
Likes
14
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x199.87mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA Default White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #20 (1.68mm) swap to Ice Blue At layer #24 (2mm) swap to Marine Blue At layer #28 (2.32mm) swap to Ice Blue At layer #32 (2.64mm) swap to White for the rest. This Hueforge is meant to be a bit thicker than the average Hueforge prints. Artist: Sarah Richford - eeveelutions Glaceon
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
