Effector Kossel

All details are the same as on the stock effector.

ANYCUBIC_KOSSEL_PLUS
Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
DELTA_PRINTABLE_RADIUS 120.0 // (mm)
Center-to-center distance of the holes in the diagonal push rods.
DELTA_DIAGONAL_ROD 267 // (mm)
Horizontal offset from middle of printer to smooth rod center.
DELTA_SMOOTH_ROD_OFFSET 174// (mm)
Horizontal offset of the universal joints on the end effector.
DELTA_EFFECTOR_OFFSET 30 // (mm)
Horizontal offset of the universal joints on the carriages.
DELTA_CARRIAGE_OFFSET 10.5 // (mm)
Horizontal distance bridged by diagonal push rods when effector is centered.
DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) // (mm) Get this value from G33 auto calibrate


I will not refuse coffee;)