Eggtracker Mini Case Housing Pod

A hard case for your Eggtracker Mini to use with high power model rockets.

Bill of materials:

Eggtracker Mini (only tested with rev C3)
Turnigy Nano-Tech Plus 300mAh 2s 70C Lipo Pack (hobbyking, amazon, search around and try not to get raped on shipping)
2 2mm threaded inserts https://www.amazon.com/gp/product/B09MCWX6VV
4 3mm threaded inserts https://www.amazon.com/gp/product/B087NBYF65
2 m2 x 4mm machine screws
4 m3 x 12mm machine screws
2-56 7/16" nylon screw, McMaster part number 94735A711
2-26 nylon nut, McMaster part number 94812A100
1 SS-5GL switch https://www.digikey.com/en/products/detail/omron-electronics-inc-emc-div/SS-5GL/272367
a 2mm rod, bicycle spokes work well. Sand the end round to ease insertion.

Printing:
I used a Prusa Mk3s and Atomic Filament orange PETG at 0.2mm layer height, 2 perimeters, 3 top/bottom layers, at least 25% infill (the attachment loop is the only place there is much infill and you want it strong).
PETG strongly recommended. Po