Thingiverse
EGO Battery Holder
par Bio_
71
Téléchargements
49
Likes
0
Makes
remastered EGO Battery Holder by don3sch June 03, 2016
Hangs the battery 30 degrees off the wall so you don't need so much space above to get the battery off
I did include larger holes in the face to get a screwdriver in, then it gets smaller about 1/2" from the wall side for the screw.
I used 2 Inch #8 Pan head screws and small washers to mount to wall.
I printed with a brim and a couple of manual supports on the sloped side.
Prints kinda like an inverted pyramid.
Hangs the battery 30 degrees off the wall so you don't need so much space above to get the battery off
I did include larger holes in the face to get a screwdriver in, then it gets smaller about 1/2" from the wall side for the screw.
I used 2 Inch #8 Pan head screws and small washers to mount to wall.
I printed with a brim and a couple of manual supports on the sloped side.
Prints kinda like an inverted pyramid.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !