Einhell Parkside Battery adapter

Machine-battery adapter for a machine that originally uses a Parkside PAB-18 1.5 A1 battery. This adapter enables to mount Einhell Power X-Change batteries to the Parkside machines.Extra stuff you need:some wiring and a soldering stationmale and female connectors (e.g. https://www.aliexpress.com/item/4000506571122.html and https://www.aliexpress.com/item/4000104101344.html )some glue to glue the contacts into the adaptersome screws to fit the two parts together (I used M4)a spring, e.g. from a ball pen NotesThese parts need minimal supports if placed upright (except for the clip).Things were designed to the point. So if your printer isn't as accurate as mine, these things might not fit as they'll be too tight.Print with more infill if you regularly remove the adapter(s) from the machine.Post-PrintingIf the parts are too tight for your machine/battery use a little file for post-processing or scale the part a little bigger.Cut out the printed supports with a sharp knife.The screw