Einstein Hueforge

Einstein Hueforged Here you can find all my HueForge creations and frame for 130x130mm , https://makerworld.com/en/@MicheleMM3D/collections/503504 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #8 (0.72mm) swap to Beige At layer #12 (1.04mm) swap to Yellow At layer #13 (1.12mm) swap to Orange At layer #14 (1.2mm) swap to Jade White for the rest.