Thingiverse
Einstein
von 3dprinterlab
39
Downloads
45
Likes
0
Makes
Einstein sculpture 285 x 224 x 280 mm,
Printed on a 3Dprinterlab.org standard Prusa i3 (200 X * 200 Y * 200 Z).
Split the model into 5 parts and printed them with 2% infill. After printing filled the parts with plaster and glued them together with epoxy and superglue. Primed the model with zinc primer, sanded, primed a second time. Sanded again and filled gaps with epoxy.
And again sanding.
Painted the model with hammer effect gold colored paint.
Printed on a 3Dprinterlab.org standard Prusa i3 (200 X * 200 Y * 200 Z).
Split the model into 5 parts and printed them with 2% infill. After printing filled the parts with plaster and glued them together with epoxy and superglue. Primed the model with zinc primer, sanded, primed a second time. Sanded again and filled gaps with epoxy.
And again sanding.
Painted the model with hammer effect gold colored paint.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!