Cults3D
€ Paid
Art
Zum Modell
Elastigirl 009 Wall Art Framed
0
Downloads
0
Likes
0
Makes
# Elastigirl 009 Wall Art Framed
**Thank you for checking out my design.**
If it helps you, please **Follow** and **Like** so you don't miss future uploads.
Free models and contact: https://makerworld.com/en/@BrunoBarros
---
## What's included
- **Multicolor wall art**: two STLs (black + white parts).
- **One-color wall art**: one combined STL (relief effect).
---
## Multicolor printing
- Import **both** multicolor STLs into your slicer as parts of the **same object**.
- Assign different colors/filaments to each STL.
- Want a simple silhouette? Import only the black STL.
- To remove floating bits on the white STL, split into parts and delete loose ones.
---
## One-color printing
- Use the **combined STL** for a single-color relief look.
- For two-tone without AMS: add a pause at the layer height change and swap filament manually.
---
## Tips
- Scale freely — vector-derived, prints well at any size.
- 0.2 mm layer height, 2–4 walls, 10–20% infill.
---
## Credits
This desi
**Thank you for checking out my design.**
If it helps you, please **Follow** and **Like** so you don't miss future uploads.
Free models and contact: https://makerworld.com/en/@BrunoBarros
---
## What's included
- **Multicolor wall art**: two STLs (black + white parts).
- **One-color wall art**: one combined STL (relief effect).
---
## Multicolor printing
- Import **both** multicolor STLs into your slicer as parts of the **same object**.
- Assign different colors/filaments to each STL.
- Want a simple silhouette? Import only the black STL.
- To remove floating bits on the white STL, split into parts and delete loose ones.
---
## One-color printing
- Use the **combined STL** for a single-color relief look.
- For two-tone without AMS: add a pause at the layer height change and swap filament manually.
---
## Tips
- Scale freely — vector-derived, prints well at any size.
- 0.2 mm layer height, 2–4 walls, 10–20% infill.
---
## Credits
This desi
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
