Eldest cover

Cover art for Eldest, one of my favorite books of all time!Two profiles, one without magnets and one with, slots sized for 3/4" Long x 3/8" Wide x 1/32" Thick Rectangular Plate shaped magnets “Atra esterni ono thelduin. Atra du evarínya ono varda. Un atra mor'ranr lifa unin hjarta onr.” Project: Eldest cover.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x248.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Scarlet Red At layer #16 (1.3