Thingiverse
electric pennyboard
por crbaws
6
Descargas
0
Likes
0
Makes
This is the enclosure I made for my electric pennyboard, this desing is very spesific to my pennyboard and the components I used (battery,ESC,switches and plugs). I am a self taught rookie in 3D desing on fusion 360, so please go easy on me. I am sharing this to maybe inspire some to do their own desing to fit their own board and components.
here : you can see picture of the de
https://drive.google.com/drive/folders/1wEigJ1_vVKwWYRNPT0R0-SPknITjaFWf?usp=sharing
bot part needs to be printed in 0.1layer height.
top part can be printed in any resolution.
you will need 6 (M5x40) , 2 (M5x10) and 2 (10-24x3) and 1 (10-24x2) bolts and nuts
here : you can see picture of the de
https://drive.google.com/drive/folders/1wEigJ1_vVKwWYRNPT0R0-SPknITjaFWf?usp=sharing
bot part needs to be printed in 0.1layer height.
top part can be printed in any resolution.
you will need 6 (M5x40) , 2 (M5x10) and 2 (10-24x3) and 1 (10-24x2) bolts and nuts
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
