Electric Rose

by the_bearded_jedi

28 Downloads

51 Likes

8 Makes

Download Model

hueforge rose flower

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x204.41mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA Elegoo Blue Transmission Distance: 2.7 PLA Polylite Starlight Nebula Transmission Distance: 2.9 PLA PolyLite Pro Magenta Transmission Distance: 1 P