Electric Spinning Wheel

### Electric Spinning Wheel
This is a spinning wheel with a big orifice of 25mm useful for making art yarns.

*I have printed everything with a e3d v6 volcano 0.8mm nozzle in PETG, layer heights from 0.2mm to 0.4mm without any support.*

**Bobbin:**
1x Bobbin_A
1x Bobbin_B
2x Bobbin_Shim
2x 6903 Bearing

- Print 1x Bobbin_A, 1x Bobbin_B and 2x Bobbin_Shim.
- Drill open the hole on the bottom of Bobbin_B (the closed hole makes it print without support). - Press both together.
- Put in one bearing at the top and one at the bottom.
- Insert a shim into each bearing.
Everything should be press fit, but depending on the printer a bit of sanding or gluing might be required.

**Flyer:**
1x Flyer_Body
2x Flyer_Clip
2x Flyer_Ring
1x 6007 Bearing
2x Aluminium Rod 8mmx250mm
1x Steel Rod 10mmx280mm (Alu should work too)

- Print 1x Flyer_Body, 2x Flyer_Clip and 2x Flyer_Ring
- Sand the surfaces where the wool will pass (maybe even laquer)
- Sand, file or grind