Thingiverse
Electric_toothbrush_base_multi
by nanoBorg88
4
Downloads
5
Likes
0
Makes
My brother has 4 electric toothbrushes and wanted something to help hold the bases neatly when he charged all of them.
I designed this peice with flat edges and locating holes so the can be glued together. I used a wooden skewer of diameter 3mm and super glue.
To flatten the edges a little more I got a sanding stone and sliding the flat edge back and forth on a flat surface with the sanding stone as the 'wall' (perpendicular to the surface) helped a bit.
The holes may need to be redrilled with a 3mm drill.
I cut the small inserts to the right length before inserting and gluing.
The print is a tight fit for the base and some force may be required to push it in. After that it should keep gripped quite nicely.
There is a keyhole shape for sliping onto a screw, sticking partly out of the wall.
if using multiple, the hole centers should be 50mm apart.
I designed this peice with flat edges and locating holes so the can be glued together. I used a wooden skewer of diameter 3mm and super glue.
To flatten the edges a little more I got a sanding stone and sliding the flat edge back and forth on a flat surface with the sanding stone as the 'wall' (perpendicular to the surface) helped a bit.
The holes may need to be redrilled with a 3mm drill.
I cut the small inserts to the right length before inserting and gluing.
The print is a tight fit for the base and some force may be required to push it in. After that it should keep gripped quite nicely.
There is a keyhole shape for sliping onto a screw, sticking partly out of the wall.
if using multiple, the hole centers should be 50mm apart.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
