Electric unicycle (EUC) universal pads

These pads are fully customizable, allowing you to adjust infill for your ideal level of stiffness. The default setup strikes a balance between comfort, rigidity, and jumping ability. For a softer, more cushioned feel, remove the custom infill entirely.3D Printing GuidelinesScaling: These pads are sized for larger wheels; for smaller wheels, reduce the X and Y axis scale to between 50-90% while keeping the Z axis at 100%.Material & Print Settings:Material: 85A TPUBed Temp: 60°CNozzle Temp: 250°CLayer Height: 0.3 mmNozzle Size: 0.8 mmPerimeters: 3Top Layers: 3-4Bottom Layers: 7-12Infill: Default infill is 10% gyroid, while custom infill regions have 25% gyroid for added stiffness. Some foot peg areas are set at 35% infill—refer to the project file for details.Flow Rate: Set to 4.5 mm³/s (or appropriate for your printer) to control print speed.For added stiffness, increase the perimeters or top/bottom layers—three perimeters are the minimum for durability. Make sure your filament is dry