Thingiverse
Electronic Component Tester Case
von reibuehl
5
Downloads
3
Likes
0
Makes
I liked the look of https://www.thingiverse.com/thing:3027565 but wanted a few extra features so I created this version which includes holes for three panel-mounted 4mm safety sockets and a 3.5 mm mono jack.
The tree 4mm sockets are Hirschmann/SKS SAB 2600 G M4 and are connected to the test points 1, 2 and 3 so that I can use regular test leads and clamps.
The 3.5mm mono jack is connected to the TEST button and can be used to connect an external start switch - in my case I wanted to be able to connect a foot pedal to start the test when I need both hands to get a good contact with the component.
I also created a lid for the battery compartment. This one should be printed with a flexible filament as it also just snaps in place.
I included the Fusion 360 file that I created from the original STLs in case somebody wants to make further modifications.
The tree 4mm sockets are Hirschmann/SKS SAB 2600 G M4 and are connected to the test points 1, 2 and 3 so that I can use regular test leads and clamps.
The 3.5mm mono jack is connected to the TEST button and can be used to connect an external start switch - in my case I wanted to be able to connect a foot pedal to start the test when I need both hands to get a good contact with the component.
I also created a lid for the battery compartment. This one should be printed with a flexible filament as it also just snaps in place.
I included the Fusion 360 file that I created from the original STLs in case somebody wants to make further modifications.
reibuehl veröffentlicht auch auf
63 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
