Elegoo Saturn Filter

An activated charcoal filter/rebreather for the Elegoo Saturn.

It lifts the whole cover for 54mm, so be aware you won't be able to look into the VAT anymore until the object is printed high enough, even in pause mode.

The filter part starts with a generic 5015 fan, you may trimm the fan to your likings.

As stoppers to keep the activated charcoal in place i used "Jewel Aquarium bioCarb Meshfilter"
( https://www.juwel-aquarium.de/Produkte/Filterung/Filtermedien/bioCarb/ )
It's another activated charcoal filter, you may use the whole filter with it for even more airflow.

As mainfilter i used 4mm activated charcoal pellets, and again the bioCarb as stopper.

The filter is big enough to place the standard Elegoo Minifilter on the left side, without blocking the airflow.

I would recommend a 24v fan when you can.

To power the fan, i opened up the printer, y-splitted on of the mainfans (MB F+) and routed the cabled out the grill, put a Step-Up-Converter in between and ru