Elephant - HueForge

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. A1 Mini Note: You can still use this (or any of my HueForge models) on your A1 Mini, all you need to do is scale down the X and Y so it fits on your bed. These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Nozzle: 0.4 The Model is 194.14x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.2mmThe Max Depth is 3.2mm and the Actual Depth is 3.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5 Swap In