Elephant

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 150x200mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Base Thickness of 0.56mm. The Max allowed Thickness is 2mm and the Actual Thickness is 2mm. It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA Anycubic Black Transmission Distance: 0.3 PLA Sunlu META Grey Transmission Distance: 3.6 PLA Elegoo Basic White Transmission Distance: 7 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #16 (1.36mm) swap to White for the rest.