Thingiverse
Engineering
Ver Modelo
Elevenwing - Fan Showdown
2
Descargas
4
Likes
0
Makes
Second revision on my fan showdown submission upon review of previous fan showdown submissions. Same goals as #1 submission Ninewing, plus:
1. Removed the other ring. Only seems to be needed if the fan blades are very thin. My chonk wings should be fine.
2. Increased the blade count to 11 for more pressure (for season 6)
3. Removed the inner and outer corners of the bottom of each blade. This seems to help avoid turbulence and pinch points with the fan frame.
4. Added a 15° offset to the outside edge of the blade. Cos is looked nice.
No idea if any of that will help.
GLHF
1. Removed the other ring. Only seems to be needed if the fan blades are very thin. My chonk wings should be fine.
2. Increased the blade count to 11 for more pressure (for season 6)
3. Removed the inner and outer corners of the bottom of each blade. This seems to help avoid turbulence and pinch points with the fan frame.
4. Added a 15° offset to the outside edge of the blade. Cos is looked nice.
No idea if any of that will help.
GLHF
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
