Elf Portrait Art

Hueforge Project: Elf Portrait Art. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 150x150mm in size. She is Scalable on the x and y up to 200x200mm without any loss of picture quality. The last two uploaded pictures are showing if you replace the brown with blue or red. Filaments I Used:PLA BambuLab Basic BlackPLA BambuLab Matte Dark Brown (swap with your choice of dark color)PLA Inland Beige (TD 4.5 fairly opaque)PLA BambuLab Basic Jade White This print uses 4 unique filaments. The final product WILL vary with different brands and opacities of filament. Change the brown to a dark color like red or blue for a different look. Swap Instructions: (if you do not have an AMS unit, just add a pause at the following layer numbers and swap to the next color) Start with BlackAt layer #6 (0.6mm) swap to Dark Brown (or your color choice)At layer #10 (0.92mm) swap to BeigeAt layer #16 (1.4mm) swap to Jade White for the rest. I wish you all the best and