Elgato Key Light Mini Grid

Elgato Key Light Mini Grid. Allows the Key Light Mini to snap in securely. Cutouts allow access to all controls as well as the mounting threads. An additional cutout on the opposite side is just to make removal a little easier so you can grip the light easier.

Insert the Key Light on the bottom first, behind the two tabs. Then snap the top into place with a little pressure to push past the top retainer tab.

To remove, grip the light with your fingers and use the opposite hand to slightly flex the top tab up so the light can be removed.

The grid is probably a little chunkier than it needed to be but it is solid. I added the 6 ribs to the bottom to keep the bottom of the frame from breaking along the layer lines, especially when using PLA. The first version I created would crack at the bottom after a few inserts and removals. With the ribs, it is very solid now. I also enlarged the bottom opening for the threaded mount to allow clearance for different mounting options. I might create