Elk Bugling at Sunset

Elk Bugling at Sunset wildlife scene (hueforge) This is a 5 color, but if you want to drop to a 4 you can remove the red, it'll only change the sunset a little, but I preferred it with the red in there. See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions:Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm The Model is 200x144.44mm in size Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA+ Sunlu Sunny Orange Transmission Distance: 8 PLA+ Sunlu Yellow Transmission Distance: 10 PLA+ Sunlu White Transmission Distance: 5 This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #14 (0.76mm) swap to Red At layer #25 (1.2mm) swap to Su