MakerWorld
2D Art
Ver Modelo
Elmo Hueforge Print
14
Descargas
17
Likes
11
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 3.12mm and the Actual Thickness is 3.12mm Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Red At layer #24 (2mm) swap to Orange At layer #31 (2.56mm) swap to White for the rest. *This was printed on an H2D with 0.4mm hardened steel nozzle. **The frame I used in the picture is from @Canadian Gamer https://makerworld.com/en/models/709013-slim-square-friction-fit-frame#profileId-639290
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
