Elsa Inspired Hueforge

Project: Elsa.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.75998mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #4e6a84 PLA PolyTerra Muted Blue Transmission Distance: 0.3 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #13 (1.12mm) swap to Marine Blue At layer #14 (1.2mm) swap to Muted Blue At layer #15 (1.28mm) swap to White for the rest.