Emax TinyHawk Stick Frame

This is a frame I have designed for the Emax TinyHawk. Everything should work but you will need a few things to finish it. The pod for the camera is separate and will need to be screwed on with some M2 screws or whatever fits. The camera mount has a hole just like the original frame but needs a dab of hot glue at the top to secure it in place and would recommend you do the same with the antenna in the antenna hole. I have made the motor mounts a bit thicker so you may need to order some M1.4x6mm screws off ebay or some place to mount the motors. You may be able to shave the motor mounts down a bit to fit the original screws. I have the TBS Unify Pro 32 Nano on mine so the original VTX may not fit but I havent tried. I also have the TBS Crossfire Nano RX on mine and it fits. The USB will fit but the Pod may need to be clipped so it can. I have a full sized Buzzer on mine so I made a hole for it to fit into on one of the pods. I use the original battery tray but if you dont have one ther