Emblema T.E.S

Project: tes.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.08mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4This print uses 2 unique filamentsSwap Instructions: Start with Jade White At layer #18 (1.44mm) swap to Blue for the rest.