Emerald Eyes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.6mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Green Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Blue Gray Transmission Distance: 3This print uses 4 unique filaments. Substitute as needed. Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to GreenAt layer #19 (1.6mm) swap to Jade WhiteAt layer #31 (2.56mm) swap to BlackAt layer #37 (3.04mm) swap to Blue GrayAt layer #44 (3.6mm) swap to Jade White for the rest.Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love? Consider signing up to show support!