Emerald Hueforge Dofus

Project: Dofus EmeraudePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: Black Transmission Distance: 0.3 Green Transmission Distance: 3 Simply Green Transmission Distance: 3 Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Green At layer #13 (1.12mm) swap to Simply GreenBorder Only Colors from here until the end. At layer #22 (1.84mm) swap to Jade White for the rest.