Emily Windsnap Bookmarks

Description:You don’t need to have an AMS or MMU, in order to print HueForge!Follow the printer setting and layer color changes the instructions below. Add the color changes in your slicer by adding a pause or color change, accordingly in your slicer of choice. You can swap colors manually when your printer stops as designated in your slicer. Print at 100% infill, with rectilinear infill, .4 nozzle size, with a layer height of 0.08mm with a base layer of 0.16mm. If you scale it up or down, make sure that the height of the print stays at 0.09 inches, otherwise you won’t achieve the same number of layers, which is required in order to achieve the final print. Swap Instructions: Start with BlackAt layer #10 (0.88mm) swap to BlueAt layer #17 (1.44mm) swap to CyanAt layer #21 (1.76mm) swap to Jade White for the rest. I actually love using the PLA Gold Silk instead of the yellow filament. I find that it gives it the extra flare and looks really good. Please keep in mind that HueForge works b