Emma White HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 139.44x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Polymaker Grey Transmission Distance: 0.6 PLA DURAMIC Matte White Skin Transmission Distance: 0.5 PLA Sunlu Stone Marble Transmission Distance: 5.8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Grey At layer #15 (1.28mm) swap to Matte White Skin At layer #21 (1.76mm) swap to Stone Marble for the rest.