Enclosure for timercircuit

This is a small box to protect the timer for my spotwelder. It concerns a relay timer like this one: https://www.aliexpress.com/item/4001078060305.html?spm=a2g0s.9042311.0.0.27424c4dIJKDFL
As the relay in this module is higher than the display, and 4 pushbuttons on the print, I had to create an adapted lid. In the short sides are 3 litle holes for all the wiring, power (DC), Start button (Foot pedal), and relay output.
The walls of the box are all 1.5 mm. For the lid I chose 2 mm.
Everything was printed on glass, without any support, only for the pushbutton pins I used a brim.
Feel free to ask for any adaption if you want to use this box an need some changes.