Thingiverse

Enclosure power cap

von NothingSpectacular

4 Downloads

5 Likes

0 Makes

This was designed to seal the hole I had to cut to run a power strip into my enclosure. it was designed for a 1.5 inch hole and the cap seals the hole around the power strip cable. The diameter of cable will probably vary, so if yours is smaller maybe finish it off by sealing the rest with caulk or hot clue. You might want to do that anyway once you get your enclosure how you want it just to make sure it doesn't pop out when you're not looking.

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat