Enclosure ventilation

This attachment is to help ventilate a 3D printer enclosure. Print x1 of all parts.Additional parts needed: Pond hose [1], Battery pack for x4 AA batteries [2], Computer fan 80x80x25mm [3]. Insert the fan into the front of ‘fan casing’ (attach with appropriate screws and nuts) and pass the wires through to the main section.Make sure the fan is blowing air outwards, not sucking air into the ‘fan casing’.Insert ‘fan rain cover attachment piece’ into the slot in the top of the 'fan casing.'Insert battery pack into the slot opposite the fan inside ‘fan casing’ (ensure on/off button lines up with side opening).Connect battery pack and fan wires (I made sure to get ones that have USB connector for ease and possible repurposing later).Tuck all wires into the side slot perpendicular to the fan and battery pack.Attach ‘fan rain cover’ sliding the edges into the wings on the side of ‘fan casing’ and the top should slot over ‘fan rain cover attachment piece’.Insert hose attachment (white